| |
 |
Closure specifcations were taken from The Closure Manufacturers Association (CMA) technical website.
The “T” and “E” dimensions are to be measured
at the top of the closure at a practical point near the end of a
full thread.
The “T1” Max. and “E1” Max. dimensions are
to measured near the bottom of the closure at the start of the full
thread. The value for “T1” Max. and “E1” Max.
include a draft angle.
|
|
Closure
Size
|
T
|
T1
|
E
|
E1
|
H
|
|
Min.
|
Max.
|
Max.
|
Min.
|
Max.
|
Max.
|
Min.
|
Max.
|
|
24-410
|
.941
|
.955
|
.964
|
.857
|
.871
|
.880
|
.622
|
.652
|
|
28-400
|
1.089
|
1.103
|
1.110
|
.995
|
1.009
|
1.016
|
.388
|
.406
|
|
28-410
|
1.089
|
1.103
|
1.112
|
.995
|
1.009
|
1.018
|
.684
|
.714
|
|
38-400
|
1.477
|
1.491
|
1.498
|
1.383
|
1.397
|
1.404
|
.388
|
.406
|
|
38-430
|
1.477
|
1.491
|
1.498
|
1.383
|
1.397
|
1.404
|
.941
|
.959
|
|
43-485
|
1.655
|
1.669
|
1.676
|
1.561
|
1.575
|
1.582
|
.406
|
.424
|
|
48-400
|
1.871
|
1.885
|
1.892
|
1.777
|
1.791
|
1.798
|
.388
|
.406
|
|
48-485
|
1.871
|
1.885
|
1.892
|
1.777
|
1.791
|
1.798
|
.406
|
.424
|
|
53-400
|
2.068
|
2.082
|
2.089
|
1.974
|
1.988
|
1.995
|
.388
|
.406
|
|
53-485
|
2.068
|
2.082
|
2.089
|
1.974
|
1.988
|
1.995
|
.401
|
.419
|
|
63-485
|
2.462
|
2.476
|
2.483
|
2.368
|
2.382
|
2.389
|
.401
|
.419
|
|
89-400
|
3.512
|
3.528
|
3.537
|
3.392
|
3.408
|
3.417
|
.515
|
.533
|
|
110-400
|
4.332
|
4.350
|
4.360
|
4.212
|
4.230
|
4.240
|
.577
|
.595
|
|
|
 |
